Mailing Lists

Time & Date


Manufacturer

AT&T Avaya Comdial Executone
Inter-Tel Iwatsu NEC Nortel
PCS Digital Toshiba Vodavi  

Sophie Systems does not guarantee this information and assumes no responsibility for the use of this information.

AT&T
AT&T 974 and 984
  1. Push the "Enter" navigation button to begin feature setup.
  2. Push the down arrow until the screen display includes TIME/DATE.
  3. Push "Enter". The screen display includes HOUR and the current hour setting.
  4. Push the right or left arrows until the correct hour displays.
  5. Push the down arrow to save the hour setting. The screen display shows "MINUTE" and the current minute setting.
  6. Push the right or left arrows until the correct minute is shown.
  7. Push the down arrow to save the minute setting. The screen display includes AM/PM and the current setting.
  8. Push the right or left arrow to toggle between AM and PM.
  9. Push the Down arrow to save the AM/PM setting. The screen display includes MONTH and the number of the current month setting.
  10. Push the right or left arrow until the number of the correct month is shown.
  11. Push the down arrow to save the month setting. The screen now displays DATE and the current day of the month setting.
  12. Push right or left arrows until the correct day of the month is shown.
  13. Push the down arrow to save the day of the month setting. The screen now displays DAY OF WEEK and the current setting.
  14. Push the right or left arrows until the correct day of the week is shown.
  15. Push the down arrow to save all settings. The screen now displays MAIN MENU.
  16. Push and hold the "Enter" key to return to the idle screen.
Avaya
Avaya Partner System
Must be done from extension 10 or 11.
  1. Push Feature and dial 00.
  2. Push the left intercom button twice.
  3. To set the time, Push # and dial 103. Enter the correct time using a 24-hour format.
  4. To set the date, Push # and dial 101. Enter the correct date using MMDDYY format.
  5. Push feature and dial 00 to save.
Comdial
Comdial Digitech - Changing time and date from attendant station:
  1. Push the "ITCM" key.
  2. Dial *#01.
  3. Enter the date in YYMMDD format.
  4. Enter 2 digits (00-23) for hour and 2 digits for minutes.
  5. Push SPKR to end.
Comdial DSU/DSU II
From extension 10, Push "*#746*"
Option One
  1. Dial "01"
  2. dial 00-99 for year
  3. Dial 10-12 for month
  4. Dial 1-31 for day
  5. Dial 00-23 for hour
  6. Dial 00-59 for minute.
Option Two
  1. Dial 00-23 for hour
  2. Dial 00-59 for minute
  3. Dial "#" to assign hours and minutes.
  4. Push speaker to exit.
Comdial DX-80
  1. Push "Feature" "#" "*" and enter your password (default is "########").
  2. Push "Show" and "0814"
  3. Push "Save" and then "Show".
  4. The option to change the year appears. Push "Next" to skip. To change, Push "Chg" then enter 2 digits for the year and then "Save" and "Next.
  5. The option to change the month appears. Push "Next" to skip. To change, Push "Chg" then enter 2 digits for the month and then "Save" and "Next.
  6. The option to change the day appears. Push "Next" to skip. To change, Push "Chg" then enter 2 digits for the date and then "Save" and "Next.
  7. The option to change the weekday appears. Push "Next" to skip. To change, Push "Chg" until you see the day you want. Push "Save" and "Next.
  8. The option to change the hour appears. Push "Next" to skip. To change, Push "Chg" then enter 2 digits for the hour in military format and then "Save" and "Next.
  9. The option to change the minutes appears. Push "Next" to skip. To change, Push "Chg" then enter 2 digits for the minutes and then "Save".
  10. Push the "On/Off" button to exit the programming mode.
Comdial Executech
  1. Push ITCM *#.
  2. Dial 01.
  3. Dial two digits (00-99) for year.
  4. Dial two digits (01-12) for month.
  5. Dial two digits (01-31) for day.
  6. Dial two digits (00-23) for hour.
  7. Dial two digits (00-59) for minute.
  8. Dial one digit (1-7) for day of week. SUN = 1, SAT = 7
  9. Push * for next feature or Push MNTR (SPKR) to end.
Comdial Impact - From Attendant Station
  1. Without picking up the handset, Push "Intercom" and dial "*#01". The display should show "Set Clock".
  2. Set the year by dialing 00-99.
  3. Set the month by dialing 01-12.
  4. Set the day by dialing two digits 01-31.
  5. Set the hour by dialing 01-23.
  6. Set the minutes by dialing 00-59.
  7. Pick up and replace the handset to complete.
Comdial DXP
  1. Push "Intercom *#0*".
  2. Select "01".
  3. Enter date (MM:DD:YY).
  4. Enter time (HH:MM).
  5. Push "#" to end.
Executone
Executone CX 816
  1. From station 100, take the handset off-hook.
  2. Dial "*".
  3. Dial "7764" (PROG).
  4. Push the "FLASH" button.
  5. Dial "28".
  6. Enter time and date as follows: YYMMDDHHMMSS.
  7. Push the "HOLD" button.
  8. .
Enter time and date in the following formats-
Year (YY) =00-99
Month (MM) =01-12
Day (DD) =0-31
Hour (HH) =00-24
Minute (MM) =00-60
Second (SS) =00-60

Executone Infostar VX II Voice Mail
  1. Push "SPKR" or lift handset. Push "436" to enter voice mail.
  2. Push the "#" key, mailbox "5000", Push password "5000" (default on most systems, yours may differ) then the "#" key.
  3. Push "5" to change time and date.
  4. After the current date plays, enter the current date MM:DD:YY.
  5. After the time plays, enter the new time HH:MM:SS in military format.
  6. When finished, Push the "*" key until you hear "exiting the system".
Executone Isoetec IDS via Operator's Phone M-32 Series
    The TIME option must be enabled on the system.
  • Lift the handset or Push the release key.
  • Dial "28" and the four digit time in 24-hour clock format (military time). For example, to set the time as 3:00 pm, dial "281500". Confirmation tone is played.
Executone Isoetec IDS via Operator's Terminal
    The TIME option must be enabled on the system.
  • While the terminal is idle, Push and hold Ctrl and "C". Release both keys. The cursor moves to the Hour field.
  • Enter the 2-digit hour in 24-hour clock format (ie., 16 for 4pm). The cursor moves to the Minutes field.
  • Enter the 2-digit minutes. The cursor moves back to the Hour field.
  • Push the Return key. The cursor moves to the Month field.
  • Enter the 2-digit month, day and year. The system inserts the "-" automatically.
  • Push and hold Ctrl and "C". Release.
Executone Isoetec Medley Time
  • Push the "Menu" key.
  • Push "Park 3".
  • Enter the password (default is "456")
  • Push "#".
  • Push "1" for System Functions.
  • Push "4" for System Clock.
  • Enter the time in 12-hour format.
  • Push "#"
  • Push AM or PM by Pushing "Park 3" in the LCD screen.
  • Push "#" to confirm.
  • Hang up or Push "HF".
Date
  • Menu (F1)
  • Park 3 Key
  • Enter the Installer Password. 789 at Default.
  • Push # to confirm
  • Dial 9819
  • Enter the Month
  • Push # to confirm
  • Enter the Day
  • Push # to confirm
  • Enter the Year
  • Push # to confirm
Executone Isoetec IDS M-32 Phones: System must have the TIME option enabled. Time may be changed only from a designated Operator Phone.
  • Lift the Handset.
  • At the dial tone, dial "28" then the 4-digit time in military format. For example, "1500" = 3:00PM.
  • A confirmation tone is heard.
Inter-Tel
Inter-Tel Axxent - From the attendant telephone
  • While the phone is idle, enter "9800". Display shows "DATE:"
  • Enter Date MM:DD:YY. Push "#" to skip date entry.
  • The display will show "TIME". Enter the time in 12-hour format.
  • The display will then show: "Push 1 for AM, Push 2 for PM". Select one.
  • Push "#" to exit.
Inter-Tel Axxess - Networked Systems Only - From the attendant telephone
  • While on hook, enter the Set Network Date and Time feature code (9810). Your displays the current date.
  • If you do not need to change the date, Push "#" or ACCEPT to skip to the time prompt.
  • Use the dialpads to enter month day and year mm-dd-yy format.
  • If you make a mistake, Push "MUTE" to backspace or "*" to start over.
  • Use the dialpad buttons to enter the time in hours and minutes "0900" for 9:00.
  • If 12-hour display is used, the display shows AM or PM. Push "1" for AM and "2" for PM.
Inter-Tel Axxess - Non-Networked Systems - From the attendant telephone
  • While on-hook, enter "9800" for Set Date/Time feature. The current date will display.
  • Push "#" to skip. To change, use keypad to enter the month, day and year (010305=January 3, 2005). The new date will display.
  • Use keypad keys to enter the time in hours and minutes (0900=9:00).
  • If the system is set for 12-hour format, the display will show select AM OR PM (AM=1 PM=2). Select 1 or 2.
  • The display reads, "SYSTEM DATE AND TIME UPDATED".
Inter-Tel GLX-PLUS
Time
  • While on-hook, Push "SPCL" and enter the Program Time/Date feature code (4)
  • Enter the Program Time feature code (1). Display will show TIME XX:XX
  • Enter the 2-digit number for hour (00-24) and 2-digit for minutes (00-59).
  • Lift and replace the handset.
Date
  • While on-hook, Push "SPCL" and enter the Program Time/Date feature code (4).
  • Enter the Program Date feature code (2). Display will show DATE DAY MON XX
  • Push "*" until the correct day is displayed. Push "#". Repeat for month and date.
  • Lift and replace the handset.
Year
  • While on-hook, Push "SPCL" and enter the Program Time/Date feature code (4).
  • Enter the Program Date feature code (3). Display will show YEAR:XXXX.
  • Enter 4 digits for the year (0000-9999).
  • Lift and replace the handset.
Inter-Tel IMX 1224/2460
  • While on-hook, Push the "SPCL" key and enter the set time of day feature code (021). Display will show "SET TIME OF DAY".
  • Use the keypad to enter the time in hours and minutes. Then Push "*" for AM or "#" for PM. Display will show "SET DATE MM:DD:YYYY".
  • Use the keypad to enter the month, day and year. Backspace to correct mistakes by using the "MUTE" key. Display will show "SET DAY OF WEEK SUN".
  • Select the day of the week by scrolling through the selections. Push "#" to go forward and "*" to go back. When the desired day is displayed, Push the "SPKR" key to end.
Inter-Tel Encore CX
  1. From the programming extension, Push the PROGRAM key.
  2. Push the Scroll Down key until "System Programming" is displayed.
  3. Select "System Programming".
  4. Enter the System Programming password and select "System".
  5. Select "Time and Date".
  6. Enter the time in 24-hour format (ie. 11:50pm=2350).
  7. To change the time only, select "Confirm".
  8. To enter the date, enter in mmddyy format.
  9. Push the speakerphone key to finish programming.
Iwatsu
Iwatsu Enterprise ADIX
From the Operator DSS when idle:
  1. Push [ICM] + [FEAT] + [6] + [4]
  2. Enter the time [HH MM] using the 24 hour military clock
  3. Push [SPKR] .
From the Attendant Console when idle:
  1. Push "ETC" + "ETC" + "ETC" + "F1"
  2. Enter the time "HH MM" using the 24 hour military clock
  3. Push "RLS".
NEC
NEC Elite for DTU DTR and DTH Models From the administrator phone:
  1. Push the Feature key.
  2. Dial 9#.
  3. Enter the hour and minute via the dial pad.
  4. Push the Recall key to change the AM/PM setting.
  5. Push the Hold key to change to the calendar setting. OR Push the Feature key to exit this feature.
  6. Push the Recall key to select the day of the week.
  7. Dial # to move the cursor to the day of the month field.
  8. Enter the day of the month via the dial pad.
  9. Push the Recall key to select the month.
  10. Dial # to move the cursor to the year field.
  11. Enter the last two digits of the year via the dial pad.
  12. Push the Feature key.
Nortel
Norstar Meridian
  • Push Feature.
  • Enter "**8463".
  • Enter the password (default is 266344). The display shows
    Hour: 01
    Next Change
  • Select CHANGE. Display shows:
    Hour: __
    Cancel
  • Enter two digits for the hour. Chose AM or PM when Prompted.
  • Select NEXT.
    The display shows:
    Minutes: 00
    Next Change
  • Enter the minutes.
  • Push the RLS button to end, or Push NEXT to change the date.
    The diplay shows:
    Year: 99
    Next Change
  • Enter the two-digit year.
  • Select NEXT and repeat to change the month and day.
  • Push the RLS key to save the time and date and exit programming.
Norstar Meridian CICS
Time
  • Push "FEAT".
  • Push "*".
  • Push "*".
  • Push "266344" (CONFIG) or "23646" (ADMIN).
  • Enter password "23456" (ADMIN) or "72787" (SCPLUS).
  • You will see "Terminals & Sets".
  • Push "Next" five times.
  • Push "Show"
  • When you see "Hour", Push "Change" or "Next" to skip.
  • Type in the hour using military time as a 2 digit number.
  • Push "Next".
  • When you see "Minutes", Push "Change" or "Next" to skip.
  • Type in the minutes using a 2 digit number.
  • Push "Next".
Date:
  • When you see "Year", Push "Change" or "Next" to skip.
  • Type the year in 2-digit format.
  • Push "Next".
  • When you see "Month", Push "Change" or "Next" to skip.
  • Type the month in 2-digit format.
  • Push "Next".
  • When you see "Day", Push "Change" or "Next" to skip.
  • Type the day in 7-digit format.
  • Push "Next".
  • When you see "End of List", Push "Rls" to exit.
Nortel Norstar
Changing the time on a Norstar system must be done using a display phone. Using a M7310 or T7316 the right 2 buttons under the display are "NEXT" and "SHOW" respectively.
  1. To enter programming mode Push "FEATURE" and "* * 2 6 6 3 4 4"
  2. Enter password (default = 266344) - display should read "Terminals & Sets"
  3. Push "NEXT" 5 times - display should read "Time and Date"
  4. Push "SHOW" - display should read "Hour:___"
  5. Push softkey "CHANGE"
  6. Enter hour - display should read "AM OK or Change"
  7. Select AM or PM
  8. Push "NEXT" - display should read "Minutes:___"
  9. Push softkey "CHANGE"
  10. Enter minutes
  11. Push "NEXT" - display should read "Year:___"
  12. Push softkey "CHANGE"
  13. Enter year
  14. Push "NEXT" - display should read "Month:___"
  15. Push softkey "CHANGE"
  16. Enter month
  17. Push "NEXT" - display should read "Day:___"
  18. Push softkey "CHANGE"
  19. Enter day
  20. Push "NEXT".
PCS Digital
PCS Digital Set date and time through the display:
  • Push "Feat" "#" "0".
  • At the "CHK PSWD:_ prompt, Enter "0000" (Default Password).
  • From the soft menu, Push "SAVE".
  • Select "TIME" and Push "SHOW".
  • Push "CHG" and enter the "YEAR" and Push "SAVE" then "NEXT".
  • Push "CHG" until the correct month appears, then Push "NEXT".
  • Push "CHG" and enter the correct day, Push "SAVE" and then "NEXT".
  • Push "CHG" until the correct weekday is selected and then Push "NEXT".
  • Push "CHG" and enter the correct hour, Push "SAVE" and then "NEXT".
  • Set date and time through the phone:
  • Push "24"
  • Wait to hear the Auto Attendant Greeting
  • Push "#".
  • Push "#" "0".
  • Enter the password (default is 9#56).
  • Push "4" for "Date & Time".
  • Push "1" to review date.
  • Push 2 to change date and time
  • Enter time in 24 hour (military) format.
  • Enter the date MM:DD:YY.
Toshiba
Toshiba DK280
Date
  • From receptionist station, without lifting the handset, Push "Intercom"
  • Dial "#651"
  • Dial the time in YY:MM:DD format.
  • Push "Redial" or "#".
  • Push speaker.
Time
  • From receptionist station, without lifting the handset, Push "Intercom"
  • Dial "#652"
  • Dial the time in military format HH:MM:SS.
  • Push "Redial" or "#".
  • Push speaker.
  • Day of the Week
  • From receptionist station, without lifting the handset, Push "Intercom"
  • Dial "#653"
  • Dial the day of the week (1-7).
  • Push "Redial" or "#".
  • Push speaker.
Toshiba Perception System - from attendant station Follow all steps even if you wish to change only the time on your system.
  • Display Date:
  • Push the "DIS TOD" key.
  • The date is now displayed as follows:
    SRC cos DEST
    Month Day Year
    Set Date:
  • Enter the date on the dial pad in MMDDYY format. The new date is displayed.
  • Display Time:
  • Push the "DIS TOD" key again.
  • The time is now displayed as follows:
    SRC cos DEST
    Hours Minutes Seconds
  • Set Time:
  • Enter the time in military time HHMMSS format (for example, 090105 for 9:01 am and 5 seconds and 210105 for 9:01pm and 5 seconds). The new time is displayed.
  • To Start the Clock and Clear Display:
  • Push the "DIS TOD" key a third time.
Vodavi
Vodavi Infinite - From any 24-button display phone
  • Enter programming mode by dialing **3226 from any 24-button display phone.
  • Push FLASH and dial 11.
  • The display should show:
    DATE & TIME
    MM/DD/YY HH:MM am
  • Choose display format by Pushing the appropriate button in the flexible button field.
  • Push the HOLD button or dial in the time and date as follows (12 digits): YYMMDDHHMMSS
  • Push HOLD to save. A confirmation tone plays and the display updates.
  • Vodavi Starplus 616, 1224, 2448, and 96EX Systems - From the First Attendant Station
  • Push ON/OFF button
  • Dial 76 on the dial pad
  • Enter time and date as follows: YY MM DD HH MM
    HH= Hour (00-23)
  • Push HOLD.
Vodavi StarPlus STS and StarPlus-Triad
Also Digital, Mach I, Infinite, DVX and XTS - From the First Attendant Station
  • The first attendant station may set system time and date.
  • Dial [692].
  • Enter time and date in the following format: YY MM DD HH MM. HH= Hour (00-23)
  • When the correct number of digits are entered, a confirmation tone sounds.

Telephones