Sangoma A104DE - PCI Express
You Save: $396.01 (15 %)
Store #: 7686
Manufacturer Part No: A104DE
Free Shipping on all orders!
Most orders ship within 1 business day.
Sangoma A104DE - PCI Express
The Sangoma A104 Card:Four ports of optimized voice and data over T1, E1, and JI available with Telco-grade hardware echo cancellation.
Part of Sangoma's award-winning Advanced Flexible Telecommunications product line, the A104 uses the same high-performance PCI or PCI Express interface that is providing superior performance in critical systems all over the world. The A104 supports up to 120 voice calls or 8.192 Mbps of full-duplex data throughput over four T1, E1, or J1 lines.
Take advantage of hardware and software improvements, as soon as they become available. Like all cards in Sangoma's AFT family, the A104 is field upgradable with crash-proof firmware. Choose the Sangoma A104D and A104DE cards with Octasic®'s DSP hardware and certified algorithms to achieve carrier-grade echo cancellation and Voice Quality Enhancement functions on your open source or even proprietary telephone system.
Sangoma A104DE - Operating systems
Sangoma A104DE - Voice applicationsAsterisk™, Yate™, Open PBX/IVR, FreeSWITCH™, TrixBox™, as well as proprietary applications.Sangoma A104DE - AFT card (PCI)
- Linux (all versions, releases and distributions from 1.0 up).
- Windows NT/2000/XP.
Sangoma A104DE - Line protocols
||Digital Signal Processor
||Hardware echo canceller
||Hardware echo canceller
Sangoma A104DE - Higher level protocolsIP/PX over Frame Relay/PPP/HDLC/X.25, X.25 over Frame Relay (Annex G), BSC over X.25 (D.T. and TOP), SNA over X.25, PPPoE, PPPoA, IP over ATM.Sangoma A104DE - Diagnostic toolsWANPIPEMON, SNMP, System logsSangoma A104DE - T1/E1 Status alarm
- FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022, Class A, CIPSR 24, AFIC-2016, IEC 60950.
- Technical certifications in Russia, Malaysia, and Australia.
Sangoma A104DE - RJ 45 E1/T1 Pinouts
- RED: Telco Red Alarm Condition.
- OOF: Out of Frame.
- LOS: Receive Loss of Signal.
- AIS: Alarm Indication Signal.
- RAI: Remote Alarm Indication (Yellow Alarm).
Sangoma A104DE - Certification
Sangoma A104DE - Production qualityISO 9002
- FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022 Class A, CIPSR 24, AFIC-S016, IEC 60950.
- Technical certifications in Russia, Malaysia and Australia
Sangoma A104DE - PCI Express Specifications
Sangoma A104DE - Technical Specifications
Sangoma A104DE - Optional DSP Hardware Echo Canceller Daughterboard
- Four T1/E1 ports with a single PCI or PCI-Express interface optimized for high performance voice and data applications.
- Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to any or all of the other ports, so both T1 and E1 are supported simultaneously.
- Support for Asterisk®, Yate™, CallWeaver™ and FreeSWITCH™ PBX/IVR Projects, as well as other open source and proprietary PBX, Switch, IVR, or VoIP gateway applications.
- All of Sangoma’s AFT products use the same base PCI interface card. Fully compatible with all commercially available motherboards - proper PCI-standard interrupt sharing without manual tuning.
- Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis.
- Includes high-quality, tested RJ45 cables and short 2U mounting clips for installation in 2U rack-mount servers.
- Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and/or data when they become available.
- Autosense compatibility with 5V and 3.3V PCI busses.
- Line decoding: HDB3, AMI, B8ZS.
- Framing: CRC-4, Non CRC4, ESF, SF, D4T1/E1. Also compatible with Japan’s J1.
- A104E and A104DE PCI Express: 1 Lane PCI Express bus.
- Power: 800 mA peak, operational 300 mA max at +3.3 V or 5 V.
- Temperature range: 0 - 50 °C.
- 32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention.
- Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
- Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
- T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications.
- Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
- Uses raw bitstream interfaces to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch.
- WANPIPE® routing stack is completely independent of TDM voice application for total system reliability.
- WANPIPE® supports certified, field-tested, and reliable Frame Relay, PPP, HDLC, and X.25.
- G.168–2002 echo cancellation in hardware.
- 1024 taps/128 ms tail per channel on all channel densities.
- DTMF decoding and tone recognition.
- Voice quality enhancement: Octasic® music protection, acoustic echo control, and adaptive noise reduction.
If you want to buy a certain quantity and want a volume discount, submit this form and a sales advisor will be in touch with you shortly.
Looking for a manual for your product?
Check out our free product manual directory by clicking here.
Needs to find a local technician to service your equipment?
Our map of local technicians can help you find experts in your area that can help. Click here to view map
Need help adjusting the time?
We provide a tutorial on setting the clock on major phone system brands here.
Need to contact the product manufacturer? click here
to see a directory of their phone numbers.